Springbak® official logo
Sprinters racing on a track alongside a volleyball player attacking at the net

Technology

How our technology delivers peak performance

Every movement in sports begins at the ground. Springbak® Springsoles give you a lightweight, ultra-thin foundation inside the athletic shoes you already trust — without changing their fit.

3/32 in

Thickness

4

U.S. patents

+15%

Butadiene resilience

30+

Years refining

Faster how?

There is a time-honored formula for improving running speed: shorten footplant time and increase stride length. Running on a resilient surface such as a rubberized track accomplishes both. NFL combine scouts know it as fact — they deduct .15 of a second from a 40-yard dash run on artificial turf versus a rubberized track.

Unless your sport is track and field, you do not compete on a rubberized surface. There is a way to make your playing surface behave like one: put material far more resilient than a rubberized track inside your athletic shoes. Dirt, grass, concrete, hardwood or turf — you carry the benefit with you.

What it is made of

Springsoles are built from two of the most resilient materials in the world: natural rubber for flexibility and comfort, and butadiene rubber — which carries roughly 15% more resilience than any other material — for response and durability. The proprietary blend includes 1,4-polybutadiene, selected for its physical and vibration-response characteristics.

It fits under your shoe's existing insole, snug against the hard surface of the shoe, and is custom trimmed to your foot. At only 3/32nds of an inch thick, there is no need to change your shoe size.

How to install them

  1. Try the Springsole without trimming first.
  2. If the factory liner is removable, remove it and place the Springsole underneath it.
  3. If the liner is lightly glued, gently pull to see whether it releases cleanly. If it does, place the Springsole underneath it.
  4. If the liner begins to tear, stretch, deform, or resist removal, stop and leave it in place. Put the Springsole on top instead.
  5. Never force out a firmly bonded or stitched liner.
  6. Trim only if needed for a flat fit, starting at the toe/forefoot and removing a very small amount at a time.
  7. Do not trim the heel and do not unnecessarily narrow the sides.
  8. Recheck the fit after every small trim.
Cutaway diagram of a shoe showing the blue Springbak® Springsole installed beneath the existing factory insole, flat against the shoe base
With a removable liner, the Springsole lies flat underneath and the liner goes back on top.

Work boots and everyday shoes

The same technology works for people on their feet all day — construction, warehouse, delivery, healthcare and everyday walking.

Springbak® work boot advertisement with an exploded view of a boot and blue Springsole insole, promising all-day comfort and less fatigue for the tradesInstructional flyer with numbered steps and icons for installing Springbak® Springsoles in work boots and everyday shoes

Insole vs. midsole layer

Full-length replacement insoles vs. a Springbak® midsole layer

Almost every performance insert on the market is a replacement insole: you pull your shoe's sock liner out and put theirs in instead. Springbak® works the other way — it is a thin midsole layer that goes in as well as your insole, so your factory insole can stay in the shoe. Every Springbak® sport page links here for the full comparison.

Full-length replacement insoles vs. a Springbak® midsole layer
Product categoryWhat it isWhere it sitsTypical thicknessWhat it does with impact
Springbak® SpringsolesA 3/32" resilient 1,4-polybutadiene sheet, trimmed only if needed for a flat fit, made in the USA and covered by four U.S. patents.Added under your shoe's own insole (or on top of a sewn-in pad). Your factory insole stays in the shoe.3/32 in (≈2.4 mm), even from heel to toeA resilient layer designed to compress under load and return toward its shape; energy return is the intended material function, not a measured sport or daily-wear result.

Sources

Carbon-plate performance insoles (e.g. VKTRY VK Insoles)A moulded, sport-specific carbon-fiber plate with a foam top cover, fitted by shoe size and athlete weight.Replaces your shoe's insole — the factory sock liner comes out and stays out.Full-length insole stack; considerably taller than a bare midsole layerFlexes and rebounds as a plate. Because it replaces the insole, it also changes footbed shape and internal shoe volume.

Sources

Cushioned replacement insoles (e.g. Spenco)Full-length foam, gel or PU insoles built around comfort, arch shape and pressure relief.Replaces your shoe's insole.Typically several millimetres, often heel-loadedDesigned primarily to absorb and spread impact rather than return it.

Sources

Viscoelastic shock-absorbing insoles (e.g. Sorbothane)Full-length inserts made from a viscoelastic polymer specified for shock absorption and vibration damping.Replaces your shoe's insole.Full-length insole thickness, varies by modelDamps impact energy by design — that is the stated purpose of a viscoelastic material.

Sources

Structured support insoles (e.g. Superfeet, custom orthotics)A rigid or semi-rigid shell with arch and heel posting, sometimes prescribed by a practitioner.Replaces your shoe's insole.Full-length shell plus postingGenerally built to support and position the foot rather than marketed for energy return; prescribed orthotics are medical/support devices used according to clinician guidance.

Sources

Your factory insole / sock linerThe die-cut foam liner your shoe was designed and fitted around.Already in the shoe — and with Springbak®, it stays there.≈1–5 mm depending on the shoeTypically a comfort and fit layer that is not marketed for engineered energy return; construction varies by shoe model.

Sources

We add, we don't replace

Springbak® is not a new insole and not a new shoe — you add one thin resilient layer rather than replacing the footbed. The 3/32-inch layer is designed to minimize changes to shoe fit. Confirm actual fit, heel position, lockdown and lace tension in your own shoes before training, competition or daily wear.

Sized for your shoe, trim only if needed

One pair covers a size range and is trimmed at the toe to your own foot outline, so a snug performance last is not a problem.

Return, not absorb

Many cushioning products are designed mainly to absorb impact. Springbak®'s 1,4-polybutadiene layer is designed to compress and return toward its shape. Separately, Weber State force-plate testing found that more than twice the force was required to displace a person standing on Springsoles — a standing measurement, not a measure of sport or walking movement.

Sources: every description above is taken from the named manufacturer's own official website. Springbak, Inc. is not affiliated with, sponsored by, endorsed by or partnered with any of these companies, and none of them have reviewed or approved this comparison. Links open the manufacturer's own site so you can read their wording first-hand.

Comparison of product categories based on each manufacturer's own publicly published product descriptions, current as of August 2026. VKTRY, Spenco, Sorbothane, Superfeet and all other names are trademarks of their respective owners, are used here for identification and comparison only, and imply no affiliation with, sponsorship by or endorsement by Springbak, Inc. — in either direction. Product designs and specifications change — check the manufacturer's current listing before buying. Springbak® makes no performance claim on behalf of any other brand.

The patents

Inventor William R. Crow received U.S. Patent Nos. 5,554,694, 5,695,850, 6,120,880 and 6,589,630 B1 — the first patents ever issued under the performance-enhancing athletic shoe component category — covering resilient performance materials in shoe inserts, insoles, midsoles and soles.

For the patent numbers, filing and grant dates, inventor and the laboratory findings side by side, see the Springbak® patent family and force plate testing. For the performance testing written into the issued patent itself — energy return ranges, jump measurements and peak-work figures — read Springbak® patented performance and proprietary technology.

Force-Plate Stability Study

In force-plate testing, subjects standing on Springbak® Springsoles showed more than twice the overall resistance to being pushed from their position.

In plain English: they were harder to move. They could hold their ground better against a sideways push—exactly the kind of stability athletes need when planting, cutting, jumping, landing, and absorbing contact.

Springbak® gives the foot a more stable, responsive platform to work from inside the shoe.

Results are from the force-plate testing described in U.S. Patent No. 6,589,630 B1. Individual results vary.

Laboratory evaluation

At the Weber State University Human Performance Laboratory, Dr. Howard Gray used force plate analysis and found athletes wearing Springsoles required more than twice the force to be displaced, concluding a significant increase in stability and functional strength under laboratory conditions.

At the University of Southern California, Dr. Robert Wiswell's treadmill analysis found athletes wearing Springsoles took fewer strides over the same distance than with placebo inserts — consistent with increased stride length.

Individual results vary. Springbak® — MADE IN THE USA.

The receipts

Patented. Force plate tested.

See the patents and the studies

Patents

  • 4

    U.S. patents

    Nos. 5,554,694, 5,695,850, 6,120,880, 6,589,630 B1 — performance-enhancing athletic shoe components and methods.

    Read the patent family

Force plates

  • 2×+

    Force to displace

    Force plate testing at the Weber State University Human Performance Laboratory: more than twice the force was needed to push subjects off balance on Springsoles.

    See the force plate data
  • Balance

    & stability study

    Evaluated with Dr. Michael Yessis, Dr. Robert Wiswell and Howard Gray, PhD — stability and functional strength, measured rather than claimed.

    Read the study