Baseball insoles for baseball and softball cleats
Same player. Same cleats. Springbak® beneath your feet—from the first pitch to the final out.
Baseball asks you to stand still for minutes and then move at absolute maximum. Springbak® Springsoles drop into metal or molded cleats and give you a resilient layer to push against on the first step out of the box, off the bag and out of the crouch — 3/32 of an inch, four U.S. patents, made in the USA.
- 2x
- force to displace a person standing on Springsoles (Weber State lab)
- 3/32"
- thin enough to keep your cleat fit and plate feel
- 4
- U.S. patents behind the material

What baseball & softball demands of your feet
- First-step quickness out of the box, off the bag and out of the crouch
- Rotational drive from the back foot in swings and pitches
- Long innings standing on hard-plate cleats with almost nothing underfoot
- Catchers squatting and re-loading well over a hundred times a game
- Doubleheaders, showcases and tournament weekends on hard infield dirt
Why Springsoles fit this sport
Rotational push-back
Energy return from the back foot supports the ground force a swing or a pitch is built on — the sequence starts at the rear cleat, not at the hands.
Grounded stance stability
The Weber State force-plate study found it took more than twice the force to push a standing player off balance on Springsoles. In the box and in the crouch that anchoring effect means a wider effective base, better balance and a stronger platform to rotate against.
Comfort in thin-insoled cleats
Most baseball cleats ship with almost nothing underfoot. A 3/32" resilient layer changes how nine innings — and a two-game Saturday — feel.
Positional versatility
Catchers, infielders, outfielders and pitchers all load the same cleat differently. One layer sits under all of it, in metal or molded.
Cleat-safe thickness
3/32" is even from heel to toe, so there is no heel lift, no change to plate feel and no change to how a locked-down cleat holds your foot.
The technology, materials and four U.S. patents behind Springsoles are detailed on How it works.
Where it shows up on the diamond


Fit check for baseball & softball footwear
Metal and molded cleats fit the same way: if the liner lifts out, the Springsole goes beneath it; if it is glued in, the Springsole goes on top. Catchers and players who move between cleats and turf trainers usually keep one pair in each. Verdicts for common models are below.
| Shoe | Verdict |
|---|---|
| Nike Vapor Edge Pro MCS (metal)Low-profile metal cleat for speed positions | Fits — trim the toe |
| Nike Force Zoom Trout 9 (molded)Cushioned molded cleat for everyday play | Fits as-is |
| Nike Hyperdiamond 4 (fastpitch)Fastpitch softball cleat | Fits as-is |
| New Balance Fresh Foam 3000v6 (metal)Metal cleat with a foam midsole | Fits as-is |
| New Balance 4040v7 (metal / molded)Classic metal and molded cleat line | Fits as-is |
| Under Armour Harper 8 (metal)Metal cleat for infielders and hitters | Fits as-is |
| Under Armour Glyde 2.0 RM (fastpitch molded)Molded fastpitch softball cleat | Fits as-is |
| Mizuno 9-Spike Advanced Sweep (fastpitch)Low-profile fastpitch cleat | Fits — trim the toe |
| Mizuno Dominant IC (metal)Metal cleat built for infield play | Fits as-is |
| adidas Icon 8 (metal / molded)Lightweight metal and molded cleat | Fits — trim the toe |
| Catcher's setup Any catcher's cleat or turf trainerHighest-volume compression job on the field | Check your pair first |
Full sizing guide, trimming instructions and fits-as-is verdicts → /catalog
Insole vs. midsole layer
Most "baseball insoles" are cushioned replacement liners: they change how soft the cleat feels, not how it works. A midsole is the layer under the liner that governs how force moves from the ground into the foot and back. Springbak® Springsoles add that layer to a metal or molded cleat you already own — under the removable liner, or on top of one that is glued in — without altering the plate, the cleat pattern or the fit of the upper. The result is the same cleat, the same batting stance and the same lead-off, with a midsole layer underneath doing the work a liner cannot.
Read the full insole-vs-midsole explainer → /how-it-works
On the record
What players and scientists found
Published endorsements from a Pro Football Hall of Fame cornerback, an NFL veteran who played on Springsoles, and the biomechanics experts who studied the material. Individual results vary.
“I can run faster, jump higher, and have less fatigue. I would highly recommend Springbak® Springsoles to enhance athletic performance.”
Weber State force plate testing
What the force-plate result means on the diamond
Weber State University Human Performance Laboratory testing — sponsored by the BYU Department of Gerontology and reviewed by Dr. Michael Yessis, Dr. Robert Wiswell of USC, and Howard Gray, PhD of BYU — measured the horizontal force needed to push a standing subject off a force plate. It took more than twice the force to displace a person standing on Springbak® Springsoles. In baseball that lands squarely on the two moments that decide at-bats and innings: the back-foot load in a swing or a pitch, and the first step out of a static stance.
- A more stable rear-foot platform to rotate against — the base a swing and a delivery are both built on.
- The anchoring effect widens the effective base of support in the box and in the crouch: better balance, less wasted motion before the move.
- Repeated compression from squatting, standing and hard-plate cleats spread by a resilient layer instead of the plate alone.
- The same feel in the ninth as in the first — the material returns to shape between reps instead of packing out like foam.
Source: Weber State University Human Performance Laboratory balance and stability evaluation, sponsored by the BYU Department of Gerontology and reviewed by Dr. Michael Yessis, Dr. Robert Wiswell (USC), and Howard Gray, PhD (BYU). See the full breakdown on Proof & testing.
Force-Plate Stability Study
In force-plate testing, subjects standing on Springbak® Springsoles showed more than twice the overall resistance to being pushed from their position.
In plain English: they were harder to move. They could hold their ground better against a sideways push—exactly the kind of stability athletes need when planting, cutting, jumping, landing, and absorbing contact.
Springbak® gives the foot a more stable, responsive platform to work from inside the shoe.
Results are from the force-plate testing described in U.S. Patent No. 6,589,630 B1. Individual results vary.
More athlete results → /testimonials · Study details → /proof · Try the core challenge → /edge/the-springbak-challenge
FAQ
Baseball & Softball insoles — frequently asked questions
Will they fit metal and molded baseball cleats?
+
Yes — both, as long as the insole comes out. Lift the liner and the Springsole sits between the plate and the liner. If the footbed is stitched in instead, the Springsole goes on top of it, directly under your foot. Trim the toe outline only if the cleat runs narrow.
Is there a softball version?
+
Same product — order the US women's or US men's size range that matches your shoe and try it untrimmed first. If needed, trim a very small amount from the toe or forefoot and recheck before cutting more.
Do Springsoles help hitting power or just running?
+
Both are rooted in what the back foot does against the ground. Players report a firmer, springier feel through the plant leg in rotation as well as out of the box. That is reported experience, not a separately measured hitting-power or running-speed result.
What about catchers who squat for nine innings?
+
Catchers are one of the highest-volume compression jobs in sport. The resilient layer is designed to compress under load and return toward its shape between crouches instead of packing out like foam, sitting underneath a position that repeats hundreds of times a game.
What does the force-plate study actually show for balance and stability in the box?
+
Weber State University's Human Performance Laboratory measured the horizontal force needed to push a standing subject off a force plate, with and without Springsoles. It took more than twice the force to displace the person standing on Springsoles. Practically, that is an anchoring effect: the material resists collapse sideways under load, so the platform you rotate against in the batter's box or hold in a catcher's crouch moves less. Bat speed, exit velocity and pitch velocity were not measured.
How does a grounded stance help a hitter or a pitcher specifically?
+
Both movements are a ground sequence: rear foot loads, hip rotates, energy travels up the chain. If the surface under the rear cleat gives way, part of that force is lost before it reaches the barrel or the ball. A stiffer, resilient layer keeps the base under the back foot stable, which is an intended application of the standing stability result — not a separately measured swing or pitch outcome.
Does more stability make me slower out of the box?
+
No — the layer is 3/32 of an inch and the same thickness heel to toe, so nothing about your cleat's geometry changes. Stability here means the platform resists sideways collapse under a standing load; first-step speed out of the box was not separately measured, but nothing about the layer's thickness or placement works against it.
Is the effect the same for a 14-year-old travel-ball player and a college infielder?
+
The mechanism is the same for anyone standing on the material: a resilient layer between the foot and a hard cleat plate. Force-plate testing was done on adults, and individual results vary with size, position and shoe. Size ranges cover youth through adult US sizes; trim only if needed for a flat fit.
Do they fit turf trainers for practice and cage work?
+
Yes. Turf trainers and cage shoes follow the same removable-liner rule as cleats: lift the liner and lay the Springsole underneath it, or if the liner is glued in, leave it in place and put the Springsole on top. Try it untrimmed first and trim only the toe or forefoot in very small amounts if needed, rechecking after each trim. Full sizing guidance and fits-as-is verdicts are on /catalog.
Springbak® Springsoles
Checking price…Ships from the USA · 30-day no-questions-asked returns
Team pricing for high schools, travel programs and colleges
Outfit a full roster — pitching staff, infield, outfield and catchers — with Springbak® Springsoles. We offer volume pricing, invoice billing and fast turnaround for verified baseball and softball programs.
Team pricing and bulk orders → /shop#team-form
Train for baseball & softball
Baseball First Step & Base Speed
Six weeks for outfielders and base stealers: read, break, and cover ground in the first three steps, where the play is actually decided.
Open programBaseball Rotational Velocity
Eight weeks of hip-to-shoulder separation and back-leg drive for hitters and pitchers who want bat and ball speed, not just weight-room numbers.
Open programRotational Power
Six weeks of hip-to-hand sequencing for golfers, hitters and throwers who need speed out of the ground.
Open programChange of Direction
Five weeks of cutting, planting and re-accelerating for field sport athletes who live between the cones.
Open programSpeed & Acceleration
Six weeks of short, sharp work aimed at footplant time and stride length — the two levers that actually move a 40 time.
Open program
Read more on The Edge
All Edge articlesSpringbak® — MADE IN THE USA. Individual results vary.
Last updated 2026-08-26.
