Balance · Stability · On your feet all day
Insoles for seniors — steadier footing, from the first step to the last
Same you. Same shoes. Springbak® beneath your feet—every step.
Balance and stability are the whole ballgame as we get older. Springbak® Springsoles are 3/32 of an inch of the most resilient material in the world. Try them untrimmed first: under a removable liner, or under a lightly glued one only if it releases cleanly — if it tears, stretches or resists, leave it and put the Springsole on top, lying completely flat. In force plate testing at Weber State University, it took more than twice the force to push a person off the plate while standing on Springsoles as it did without them.

Balance · Strength · Stability
Patented balance and stability insoles for seniors
Balance, strength and stability matter more every year. Springsoles are a 3/32-inch layer of resilient 1,4-polybutadiene. In force plate testing at Weber State University, it took more than twice the force to displace a standing person on Springsoles than without them. The test measured standing stability. It did not measure walking, falls or injury.
The design is protected by four U.S. patents: 5,554,694, 5,695,850, 6,120,880 and U.S. Patent No. 6,589,630 B1.
Already wear orthotics? It goes underneath.
Springsoles do not replace your orthotic. If the clinician who prescribed it approves, the Springsole goes underneath your current orthotic, and the orthotic itself is not trimmed or altered. Ask your clinician before adding any layer, then check that everything lies completely flat and confirm fit in your own shoes.
The force plate study
More than twice the force to displace a standing subject
Springbak® Springsoles were tested on a force plate at Weber State University. Standing on Springsoles, it took more than twice the force to displace the subject off the plate than it did standing in the same shoes without them. What was measured was standing resistance to displacement. Everyday standing — at the sink, in a line — and wearing them in your usual shoes are intended applications of that result; walking, turning, curbs and balance during movement were not tested.
“Our department sponsored a strength and stability study at the Weber State University human performance lab. After reviewing the force plate data, showing it took more than twice the force to push off the subjects off the force plate when standing on Springsoles, we have to conclude there is significant strength increase to individuals utilizing Springsoles.”
Howard Gray's "strength increase" is his attributed conclusion from the force-plate data, not a separate strength measurement. Springsoles are 3/32 of an inch thick and covered by four U.S. patents — the first patents ever issued for performance-enhancing shoe components. Read the four U.S. patents and the Weber State force plate balance and stability study.
See the technology and patentsInsole vs. midsole layer
Full-length replacement insoles vs. a Springbak® midsole layer
Almost every performance insert on the market is a replacement insole: you pull your shoe's sock liner out and put theirs in instead. Springbak® works the other way — it is a thin midsole layer that goes in as well as your insole, so your factory insole can stay in the shoe. For steadier footing that matters twice over: your shoe was engineered around its own footbed, and keeping it in place is designed to minimize changes to the fit you are used to.
| Product category | What it is | Where it sits | Typical thickness | What it does with impact |
|---|---|---|---|---|
| Springbak® Springsoles | A 3/32" resilient 1,4-polybutadiene sheet, trimmed only if needed for a flat fit, made in the USA and covered by four U.S. patents. | Added under your shoe's own insole (or on top of a sewn-in pad). Your factory insole stays in the shoe. | 3/32 in (≈2.4 mm), even from heel to toe | A resilient layer designed to compress under load and return toward its shape; energy return is the intended material function, not a measured sport or daily-wear result. |
Sources | ||||
| Carbon-plate performance insoles (e.g. VKTRY VK Insoles) | A moulded, sport-specific carbon-fiber plate with a foam top cover, fitted by shoe size and athlete weight. | Replaces your shoe's insole — the factory sock liner comes out and stays out. | Full-length insole stack; considerably taller than a bare midsole layer | Flexes and rebounds as a plate. Because it replaces the insole, it also changes footbed shape and internal shoe volume. |
Sources | ||||
| Cushioned replacement insoles (e.g. Spenco) | Full-length foam, gel or PU insoles built around comfort, arch shape and pressure relief. | Replaces your shoe's insole. | Typically several millimetres, often heel-loaded | Designed primarily to absorb and spread impact rather than return it. |
Sources | ||||
| Viscoelastic shock-absorbing insoles (e.g. Sorbothane) | Full-length inserts made from a viscoelastic polymer specified for shock absorption and vibration damping. | Replaces your shoe's insole. | Full-length insole thickness, varies by model | Damps impact energy by design — that is the stated purpose of a viscoelastic material. |
Sources | ||||
| Structured support insoles (e.g. Superfeet, custom orthotics) | A rigid or semi-rigid shell with arch and heel posting, sometimes prescribed by a practitioner. | Replaces your shoe's insole. | Full-length shell plus posting | Generally built to support and position the foot rather than marketed for energy return; prescribed orthotics are medical/support devices used according to clinician guidance. |
Sources | ||||
| Your factory insole / sock liner | The die-cut foam liner your shoe was designed and fitted around. | Already in the shoe — and with Springbak®, it stays there. | ≈1–5 mm depending on the shoe | Typically a comfort and fit layer that is not marketed for engineered energy return; construction varies by shoe model. |
Sources | ||||
We add, we don't replace
Springbak® is not a new insole and not a new shoe — you add one thin resilient layer rather than replacing the footbed. The 3/32-inch layer is designed to minimize changes to shoe fit. Confirm actual fit, heel position, lockdown and lace tension in your own shoes before training, competition or daily wear.
Sized for your shoe, trim only if needed
One pair covers a size range and is trimmed at the toe to your own foot outline, so a snug performance last is not a problem.
Return, not absorb
Many cushioning products are designed mainly to absorb impact. Springbak®'s 1,4-polybutadiene layer is designed to compress and return toward its shape. Separately, Weber State force-plate testing found that more than twice the force was required to displace a person standing on Springsoles — a standing measurement, not a measure of sport or walking movement.
Sources: every description above is taken from the named manufacturer's own official website. Springbak, Inc. is not affiliated with, sponsored by, endorsed by or partnered with any of these companies, and none of them have reviewed or approved this comparison. Links open the manufacturer's own site so you can read their wording first-hand.
Comparison of product categories based on each manufacturer's own publicly published product descriptions, current as of August 2026. VKTRY, Spenco, Sorbothane, Superfeet and all other names are trademarks of their respective owners, are used here for identification and comparison only, and imply no affiliation with, sponsorship by or endorsement by Springbak, Inc. — in either direction. Product designs and specifications change — check the manufacturer's current listing before buying. Springbak® makes no performance claim on behalf of any other brand.
Force-Plate Stability Study
Weber State force-plate testing found that more than twice the force was required to displace a person standing on Springsoles compared with standing without them.
This was a standing resistance-to-displacement measurement. It did not directly measure walking stability, gait, fall prevention, fall risk, pain, fatigue, strength improvement, or performance during movement.
Results are from the force-plate testing described in U.S. Patent No. 6,589,630 B1. Individual results vary.
What a day on your feet actually asks of you
- Standing, walking and household hours on hard floors that give nothing back
- Balance and stability that need every bit of help underfoot
- Uneven ground — curbs, driveways, grass, gravel, wet tile
- Tired feet and legs by late afternoon, which is when footing gets least sure
Why Springsoles fit seniors
More than twice the force to displace you
In force plate testing conducted at Weber State University, it took more than twice the force to push a person off the force plate while standing on Springsoles as it did without them. That is a measured stability difference, standing still, in your own shoes.
Designed to return energy
Springsoles are made from 1,4-polybutadiene, a highly resilient material designed to compress under each step and return toward its shape. Energy return is the material's intended function; reduced fatigue or soreness has not been measured. Some customers report their feet feel different at the end of a long day — those are personal observations.
Only 3/32 of an inch thick
For walking shoes, sneakers or work shoes: try it untrimmed, under a removable liner — or under a lightly glued one only if it releases cleanly. If the liner tears, stretches, deforms or resists, leave it in place and put the Springsole on top. Confirm it lies completely flat. If you wear a prescribed orthotic, ask the clinician who prescribed it first.
Four U.S. patents
Springbak® holds the first U.S. patents ever issued for performance-enhancing shoe components. The same patented material seniors stand on is what athletes compete on.
Putting them in the shoes you already wear
- Try the Springsole without trimming first.
- If the factory liner is removable, remove it and place the Springsole underneath it.
- If the liner is lightly glued, gently pull to see whether it releases cleanly. If it does, place the Springsole underneath it.
- If the liner begins to tear, stretch, deform, or resist removal, stop and leave it in place. Put the Springsole on top instead.
- Never force out a firmly bonded or stitched liner.
- Trim only if needed for a flat fit, starting at the toe/forefoot and removing a very small amount at a time.
- Do not trim the heel and do not unnecessarily narrow the sides.
- Recheck the fit after every small trim.
- If you wear a prescribed orthotic, follow the same liner rule and ask your clinician before adding a layer.
- Put a pair in each of the shoes you actually wear all day, so you have the same layer in every pair. Confirm fit in each one.
Staying steady as we age: a balance checklist for seniors
Falls are a serious health risk for older adults. No insole can prevent them. These are the steps health agencies such as the CDC recommend most often.
Talk to your doctor
Ask for a balance and fall-risk check, and a review of medicines that can cause dizziness. This is the most important step on the list.
Keep moving
Regular strength and balance exercise, such as walking, tai chi or a class your doctor or physical therapist suggests, is one of the most widely recommended habits for staying steady.
Check your eyes and hearing
Get both checked regularly. Seeing the edge of a step and hearing what's around you both affect footing.
Make home safer
Use good lighting, especially at night. Add handrails on both sides of stairs and grab bars in the bathroom, and remove loose rugs and clutter from walkways.
Wear sturdy, well-fitting shoes
Closed shoes with a secure fit and non-slip soles, not loose slippers or worn-out pairs.
Where Springsoles fit in
A thin, patented layer inside those sturdy shoes. In Weber State testing it took more than twice the force to displace a standing person on Springsoles. They add to the steps above and are not a substitute for any of them.
Buying insoles for a parent or grandparent?
- Pick the size range that covers the shoe size they wear now. See the sizes in the cart section below.
- Get one pair for each pair of shoes they wear most: walking shoes, house shoes and church or work shoes.
- Help them fit it: try it untrimmed first and make sure it lies completely flat. Follow the fitting steps above.
- If they wear a prescribed orthotic, check with their clinician first.
- Made in the USA, so it's a gift you can feel good about giving.
Springbak® Challenge
The trunk and core twist test
Turning is where footing gets tested — reaching into a cupboard, backing out of the driveway, looking behind you on a walk. This is the core-rotation half of the Springbak® Challenge, and it takes about a minute in your own kitchen. Nothing to measure, nothing to jump.
Test your core rotation
- Stand comfortably with your feet shoulder-width apart.
- Keep your feet planted and face straight ahead.
- Extend your arms in front of you, or cross them over your chest.
- Slowly rotate your upper body as far as is comfortable — without moving your feet.
- Note your finishing position: a spot on the wall, a piece of furniture, a mark on the floor.
- Insert your Springbak® Springsoles and repeat the exact same movement.
- Compare your comfort, balance, control and range of rotation.
Do not force the movement, and steady yourself near a counter or a chair back if you like. The purpose is to compare how your body feels and moves under the same conditions — not to reach further than is comfortable.
Score your result
Take the test, then rate the second attempt against the first to get your Springbak® Challenge score.
Turn. Control. Compare. Feel what Springbak® does beneath your foundation.
Shop now
Add Springsoles to your cart
One pair per pair of shoes is what most people order — the walking shoes, the work shoes and the house shoes. Pick a size range below and it drops straight into your springbak.net cart, ready to check out.
Springbak US Men's Size
US men's sizing — trim only if needed
Checking price…Springbak US Women's Size
US women's sizing — trim only if needed
Checking price…Tracked shipping from Springbak® — U.S. shipping $7.95. International shipping calculated at checkout.
FAQ
Springsoles for seniors — questions we get most
Comparing options for yourself or a family member? See the full best insoles for seniors FAQ.
Do Springsoles help with balance and stability for seniors?
+
Force plate testing at Weber State University found it took more than twice the force to displace a person standing on Springsoles compared with standing without them. That is why balance and stability are the two things seniors tell us about most.
Are these good insoles for standing on your feet all day?
+
Many people wear them for long days on their feet. Springsoles are a thin 3/32-inch layer of resilient material designed to compress and return toward its shape with each step — that energy return is the intended material function, not a measured fatigue result. Some customers report feeling less worn out by the end of the day; those are personal observations, and the force-plate test did not measure energy return or fatigue.
Will they fit in my existing walking shoes?
+
If you are looking for insoles for walking that keep your current shoes, the 3/32-inch layer fits many walking shoes, sneakers, work shoes and boots — confirm the fit in your own pair. Try it untrimmed first. If the factory liner is removable, try the Springsole underneath it. If the liner is lightly glued, remove it only if it releases cleanly with gentle, steady pressure; if it tears, stretches, deforms or resists removal, stop and leave it in place, and put the Springsole on top. Confirm it lies completely flat.
Can I use Springsoles with my orthotics?
+
If you wear a prescribed orthotic, ask the clinician who prescribed it before adding any layer or changing its placement. Do not alter or remove a prescribed device without their guidance. Only once your clinician approves, follow the normal installation guide on this page.
Are they comfortable for arthritis or sore feet?
+
Springsoles are not a medical device and have not been shown on this page to treat arthritis, pain, or knee or hip conditions. They are a thin 3/32-inch resilient layer used in your everyday shoes. Some customers report a comfort difference — those are personal observations, not measured medical outcomes. For arthritis, persistent pain, prescribed orthotics or any specific medical condition, consult a qualified clinician.
What size should I order and what do they cost?
+
Choose the range that covers your shoe size. US men's: 6/7, 8/9, 10/11. US women's: 7/8, 9/10, 11/12. EU: 38/40, 41/42, 43/45. UK: 5/6, 7/8, 9/10. Try it untrimmed first. Trim only if needed for a flat fit, removing very small amounts from the toe or forefoot and rechecking after each trim. Never trim the heel and do not unnecessarily narrow the sides. For the current price, use the View current price link or the size selector in the cart section of this page.
What should I look for when comparing the best insoles for seniors?
+
Whether you are shopping for senior insoles or insoles for elderly family members, compare features you can check: thickness (Springsoles are 3/32 of an inch), whether they work with the shoes and liners you already wear, how installation and trimming work, what the material is (1,4-polybutadiene), and whether they lie flat in your own shoes. When comparing products marketed as balance insoles or stability insoles, distinguish standing-test evidence from claims about walking or fall prevention. The Weber State test measured standing resistance to displacement only.
Are there insoles for balance problems or unsteady walking?
+
Springsoles were tested standing still, not walking. In Weber State force plate testing it took more than twice the force to displace a standing person on Springsoles than without them. Walking, turning and balance problems while moving were not tested, and Springsoles are not a medical device. If you feel unsteady when walking, see your doctor or a physical therapist first. They can find the cause and recommend balance exercises.
Do insoles help elderly balance?
+
The evidence for Springsoles covers standing only. The Weber State force plate test measured how much force it took to push a standing person off balance, and it took more than twice as much on Springsoles. It did not measure falls, walking balance or injury. The Springsole design is covered by four U.S. patents, including U.S. Patent No. 6,589,630 B1.
Can insoles go under orthotics?
+
Springsoles do not replace an orthotic. If your clinician approves, the 3/32-inch Springsole goes underneath your current orthotic, and the orthotic itself is not trimmed or altered. Ask the clinician who prescribed it before adding any layer, and confirm everything lies completely flat and the shoe still fits.
What are good insoles to buy for an elderly parent?
+
Choose the size range that covers the shoe size they wear now. Put one pair in each pair of shoes they wear most, and help them fit it: try it untrimmed first, under a removable liner, and confirm it lies completely flat. If they wear a prescribed orthotic, check with their clinician first.
Do seniors use them for pickleball, golf and walking?
+
Constantly. The same pair works for a pickleball morning, a round of golf and the rest of the day on your feet.
Where to go next
Pickleball insoles
The court sport seniors play most — split-steps, kitchen resets and hours on concrete.
Read the pickleball pageGolf insoles
Steadier base through the swing and 18 holes of walking on uneven ground.
Read the golf pageHow Springsoles work
The 3/32-inch profile, 1,4-polybutadiene resilience and the four U.S. patents.
See the technologyGet a pair
Pick your size and check out on springbak.net, made in the USA.
Shop Springsoles
Springbak® — MADE IN THE USA. Springsoles are not a medical device and are not intended to diagnose, treat or prevent any condition. Individual results vary.
Still working, or on your feet all day at home?
The same thin resilient layer, designed to return energy, is intended for a shift on concrete or a day on tile floors; fatigue benefits have not been measured. See insoles for standing all day for hard-floor fatigue, work shoes and boots.
