Sports insoles
Thin sports and athletic insoles, by sport
Springbak® Springsoles are 3/32-inch patented performance insoles, made in the USA. They go under a removable liner, or on top of a firmly bonded or stitched liner. Pick your sport for the movement demands, fitting notes and training that go with it.
- 3/32-inch thin
- Four U.S. patents
- Made in the USA
- US, EU and UK sizes

Pickleball insoles
pickleball insoles
Explore Springbak® pickleball insoles for court shoes and hard-court play. Patented 3/32-inch resilient layers, sizing, fit checks and installation.
Read moreBasketball insoles
basketball insoles
Comparing basketball insoles? Springsoles add a thin 3/32-inch patented layer to basketball shoes. Fit checks for 10 popular shoes, sizing, Made in USA.
Read moreFootball insoles
football insoles for cleats
Explore Springbak® football insoles for cleats and turf shoes. Patented 3/32-inch resilient layers, cleat-fit checks, sizing and installation guidance.
Read moreTrack & Field insoles
track insoles
Can you put insoles in track spikes? Yes: 3/32-inch Springbak® Springsoles sit on the sewn-in pad. A BYU track coach's view, 4 U.S. patents, Made in USA.
Read moreBaseball & Softball insoles
baseball insoles
Explore Springbak® baseball insoles for baseball and softball cleats. Patented 3/32-inch resilient layers, sizing, installation and cleat-fit guidance.
Read moreVolleyball insoles
volleyball insoles
Volleyball insoles for court shoes, used on rosters coached by Hugh McCutcheon and John Cook. Patented 3/32-inch layer, made in USA, with sizing and fit help.
Read moreSoccer insoles
soccer insoles for cleats
Explore Springbak® soccer insoles for cleats, boots and turf shoes. Patented 3/32-inch resilient layers, sizing, liner placement and football-boot fit checks.
Read moreGolf insoles
golf insoles
Explore Springbak® golf insoles: patented 3/32-inch resilient layers for compatible golf shoes. Check sizing, liner placement and fit before a round.
Read moreStrength & Training insoles
training insoles
Explore Springbak® training insoles for gym shoes: patented 3/32-inch resilient layers. Check sizing and liner-based installation for your own trainers.
Read more
Not competing? Springsoles are just as much about footing as speed — see balance and stability insoles for seniors on their feet all day, backed by the Weber State University force plate testing, or insoles for standing all day.
Buying guide
Best sports insoles: what to compare
There is no single best insole for everyone. These are the questions worth asking about any athletic insole, Springsoles included.
01
Thickness and room in your shoe
Cushioned and arch-support insoles are often thick. Springsoles are a 3/32-inch layer, so they take up less room in snug court shoes, spikes and cleats. Check your own pair before game day.
02
What the insole is built to do
Most insoles are made to cushion or support the arch. Springsoles use a patented 1,4-polybutadiene compound formulated to return energy rather than only absorb it.
03
How it goes in
Try the Springsole without trimming first. If the factory liner is removable, remove it and place the Springsole underneath it. If the liner is lightly glued, gently pull to see whether it releases cleanly; if it does, place the Springsole underneath it. If the liner begins to tear, stretch, deform, or resist removal, stop and leave it in place. Put the Springsole on top instead. Never force out a firmly bonded or stitched liner.
04
Sizing
Order the range that covers your normal shoe size: US men's 6/7, 8/9, 10/11; US women's 7/8, 9/10, 11/12; EU 38/40, 41/42, 43/45; UK 5/6, 7/8, 9/10.
05
Orthotics
Springsoles are not an orthotic or a medical device. If you wear prescribed orthotics, ask your clinician before adding any layer.
06
Proof behind the claims
Look for testing you can read. Springbak® publishes its four U.S. patents and the Weber State force plate study, including what the study did not measure.
Read the patent behind the methods of use: U.S. Patent No. 6,589,630 B1. Full fitting steps are on how Springsoles work.
Compare the approaches
Carbon fiber insoles vs thin rubber insoles
Carbon fiber insoles and Springsoles are built two different ways. Neither is right for every athlete, so compare how each one is made and where it goes in your shoe.
Carbon fiber insoles
- A stiff, moulded carbon fiber plate, usually built into a full replacement insole.
- Works structurally: the plate bends under load and springs back.
- The insole already in your shoe usually comes out so the plate insole can go in.
- A structural plate is thicker and stiffer than a stock insole, so check how your shoe fits with it.
Springbak® Springsoles (thin rubber layer)
- A 3/32-inch layer of patented 1,4-polybutadiene rubber, not a carbon plate.
- Works through the material: formulated to return energy rather than only absorb it.
- Goes under a removable liner, or on top of a firmly bonded or stitched liner.
- Designed to minimize changes to fit. Try it in your own pair before you play.
See the full sourced comparison: Springsoles vs VKTRY carbon fiber insoles.
Force-Plate Stability Study
In force-plate testing, subjects standing on Springbak® Springsoles showed more than twice the overall resistance to being pushed from their position.
In plain English: they were harder to move. They could hold their ground better against a sideways push—exactly the kind of stability athletes need when planting, cutting, jumping, landing, and absorbing contact.
Springbak® gives the foot a more stable, responsive platform to work from inside the shoe.
Results are from the force-plate testing described in U.S. Patent No. 6,589,630 B1. Individual results vary.
Sports insole questions
- Are thin insoles good for sports?
- A thin insole leaves more room in a snug athletic shoe than a thick cushioned one. Springsoles are 3/32 inch thick, but every shoe is different, so try them in your own pair before you play.
- Do performance insoles work?
- It depends on what was tested. At the Weber State University Human Performance Laboratory, more than twice the force was required to displace a standing subject on Springsoles compared with standing without them. That study measured standing stability only. It did not measure jump height, speed, landing forces or injury.
- Will Springsoles fit my shoes?
- Check your own pair first. Try the Springsole without trimming first. Trim only if needed for a flat fit, starting at the toe/forefoot and removing a very small amount at a time. Do not trim the heel and do not unnecessarily narrow the sides. Recheck the fit after every small trim.
- Can I use Springsoles with orthotics?
- Springsoles are not a medical device and do not replace an orthotic. If you wear prescribed orthotics, get your clinician's approval before adding or repositioning any layer.
More answers on materials and sizing are in the Springbak® FAQ.
