Springbak® official logo

Soccer insoles for cleats, boots and turf shoes

Same player. Same cleats. Springbak® beneath your feet—from kickoff to the final whistle.

A soccer match involves repeated running, accelerations, sprints and changes of direction. Springbak® Springsoles add a thin 3/32-inch 1,4-polybutadiene layer to soccer boots and turf shoes. The material is designed to compress under load and return toward its shape. Confirm that it lies flat and check fit, heel position, lockdown and lace tension in your own footwear.

Soccer player driving forward with the ball under floodlights, cleats spraying turf on the sprint

What soccer demands of your feet

  • Repeated high-speed running across 90 minutes
  • Accelerations, checks and changes of direction
  • Thin-soled boots designed for touch, not cushioning
  • Firm ground, artificial turf and hard training pitches

Why Springsoles fit this sport

Repeat-sprint support

A resilient layer designed for repeated soccer movements. Repeat-sprint performance and fatigue over a match have not been directly measured.

Built thin for boots

As soccer boot insoles, the thin 3/32" layer is designed to minimize changes inside the boot. Confirm actual fit, lockdown, lace tension and feel in your own boots.

Turf relief

Springsoles can be used in firm-ground boots and as insoles for turf shoes. The resilient layer is designed to compress and return toward its shape; shin loading, pain, injury risk and impact reduction were not measured.

The technology, materials and four U.S. patents behind Springsoles are detailed on How it works.

Where it shows up on the pitch

A match is decided in small moments: the first step to a loose ball, the plant foot on a cut back against the grain, the recovery run tracking a runner after you've already covered ground. Every one of those moments loads through the same thin sole, over and over, for ninety minutes plus stoppage. The press high up the pitch asks for a quick first step and an equally quick reset. The plant foot on a change of direction takes the full weight of the cut in an instant, with almost nothing but boot leather and a thin liner between foot and ground.

By the 75th minute, those same movements are still being asked of legs that have already covered several miles. Springsoles do not change what the match demands of a player, and they were not measured for fatigue, sprint speed or cutting speed. What Springbak®'s force-plate testing measured was standing stability under load — a more resistant base to push against, repeated the same way whether it's minute one or minute ninety.

What players actually put in a boot

Boots fall into a few fit families. Firm-ground (FG) boots are built for natural grass and typically run the thinnest and tightest. Artificial-ground (AG) boots use a different stud pattern for synthetic turf but fit similarly. Turf shoes, with a flat rubber outsole, run closer to a trainer and usually have more room. Laceless and knit-upper boots are increasingly common at every price point, and most of them use a glued-in liner rather than a removable one.

A lot of players still reach for a stock liner, a cushioned comfort insole, or even an orthotic to solve discomfort — but none of those sit at the midsole level where ground force actually transfers. A cushioned insole in a boot that already runs a half-size tight usually just makes the boot tighter and the touch softer. Springsoles are designed to add structure without the bulk, and the 3/32-inch layer is designed to minimize changes to fit. On a removable-liner boot, the Springsole goes underneath the liner; on a firmly glued-in liner, it sits on top. Either way, confirm fit, toe room and lockdown in your own boots.

Goalkeepers

Goalkeepers load their feet differently than outfield players: the lateral push off a planted foot to get across goal, the landing after a dive or a high claim, and the set position before a shot or a cross all depend on a stable base in the split second before the ball arrives. The boots are usually similar builds to outfield boots or flat-soled turf-style keeper boots, so the same removable-liner or glued-in-liner rule applies when fitting a Springsole.

Fit check for soccer footwear

Boots can be snug, so check liner construction in your own pair rather than assuming compatibility from the model name. Try the Springsole untrimmed first: underneath a removable liner, or on top of a liner that resists gentle removal. Confirm flat placement, heel position, toe clearance and lockdown; unchanged fit is not guaranteed. The model rows below still need verification.

Springsole fit verdicts for common soccer shoes
ShoeVerdict
Nike Mercurial Vapor / SuperflyFG bootCheck your pair first
Nike Phantom GXFG/AG bootCheck your pair first
Nike Tiempo LegendFG leather bootCheck your pair first
adidas PredatorFG bootCheck your pair first
adidas X CrazyfastFG speed bootCheck your pair first
adidas Copa PureFG leather bootCheck your pair first
Puma FutureFG bootCheck your pair first
Puma UltraFG speed bootCheck your pair first
New Balance Furon / TekelaFG bootCheck your pair first
Mizuno MoreliaFG leather bootCheck your pair first
Any brand Futsal / indoor shoesIndoor/futsalCheck your pair first

Full sizing guide, trimming instructions and fits-as-is verdicts → /catalog

Insole vs. midsole layer

Soccer boots are built thin on purpose, and a thick cushioned insole fights that design: it lifts the heel, crowds the toe box and dulls touch. A midsole layer is a different thing. Springbak® Springsoles are a slim, resilient-rubber layer that sits under the boot's removable liner, or on top of a fixed one, adding structure beneath the foot without adding bulk around it. Nothing goes underneath the soleplate or studs. The 3/32-inch layer is designed to minimize changes to fit; confirm fit, lockdown and touch in your own boots. Same boot — with a thin layer added under every stride and every cut.

Read the full insole-vs-midsole explainer → /how-it-works

Weber State force plate testing

What the standing result means for a plant and recovery run

In Weber State's standing force-plate test, more than twice the force was required to displace a person standing on Springsoles compared with standing without them. Planting to cut inside a defender, pushing off from a goalkeeper's set position and tracking a runner late in the match are separate, moving tasks. The study does not demonstrate sharper cuts, greater diving reach or repeat-sprint endurance, nor does it establish unchanged ball touch, lower landing forces or fresher legs in stoppage time.

    See the full breakdown on Proof & testing.

    Force-Plate Stability Study

    The study compared resistance to displacement while standing with and without Springsoles — see the method and measured result.

    Closing down a pass, braking before a cutback and recovering after an overlapping run all happen in motion, often on different grass or turf surfaces. These intended boot applications were not studied; the standing evidence cannot establish faster pressing, improved change of direction, lower landing forces or sustained running performance over 90 minutes.

    Results are from the force-plate testing described in U.S. Patent No. 6,589,630 B1. Individual results vary.

    More athlete results → /testimonials · Study details → /proof · Try the core challenge → /edge/the-springbak-challenge

    FAQ

    Soccer insoles — frequently asked questions

    Do Springsoles fit tight, low-profile soccer boots?

    +

    It depends on the boot — snug speed boots leave less room, so compatibility varies. Try the Springsole without trimming first; it goes underneath a removable liner, or on top if the liner is glued in and will not release cleanly. Trim only the toe/forefoot in small amounts if needed, never the heel. Confirm the Springsole lies completely flat and check fit, heel position, lockdown and lace tension in your own boot.

    Will they help on firm ground and artificial turf?

    +

    Springsoles can be used in compatible firm-ground boots and turf shoes. The resilient layer is designed to compress under load and return toward its shape. Turf performance, fatigue, shin loading and impact reduction were not directly measured.

    Are they allowed in match play?

    +

    Rules can vary by school, league, federation and competition. Springbak does not treat product design or past athlete use as governing-body approval. Check the current equipment rules for your league, school or federation, and ask the appropriate official if you are unsure.

    Do they fit laceless and knit-upper boots?

    +

    It depends on the boot. Many laceless and knit boots use a glued-in liner; never force it out — place the Springsole on top instead. Knit uppers vary in how much room they leave, so try it untrimmed first and confirm fit, lockdown and lace tension (or BOA tension) in your own boot before trimming.

    Will they change how the ball feels on my foot?

    +

    The Springsole sits under the foot, inside the sole structure — not around the foot or against the upper. The boot's upper itself is not altered, and the 3/32-inch layer is designed to minimize changes inside the boot, but feel can still differ. Confirm touch for yourself, since boot fit and personal touch preference vary.

    Do they help in the last 20 minutes when my legs go?

    +

    Springbak's force-plate testing measured standing resistance to displacement, not late-match fatigue, sprint speed or performance decline. It did not measure whether Springsoles reduce fatigue or preserve late-match performance. If you're training to hold up better in the last 20 minutes, see /train/soccer-repeat-sprint-engine for a program built around that demand.

    Do they work for goalkeepers?

    +

    Keepers can use Springsoles the same way outfield players do — underneath a removable liner, or on top of a glued-in one. The lateral push-off, landing and set-position demands of goalkeeping are all stability-under-load situations, which is what Springbak's force-plate testing measured; it did not measure diving range, reaction time or landing force reduction.

    Can I use the same pair in futsal or indoor shoes?

    +

    Often, yes. Many flat indoor and futsal shoes have a removable liner, so the Springsole goes underneath the same way it would in a trainer. Check that it lies flat and doesn't crowd the toe box before playing in it.

    Are they suitable for youth players?

    +

    Springsoles are not a medical device and aren't sport- or age-restricted by design, but a growing foot is different from an adult foot. Parents and young players with any existing foot condition, or who use prescribed orthotics, should check with a clinician first. Fit and sizing should always be confirmed in the player's own boots.

    Do they help with cutting and knee load?

    +

    Springbak's testing measured standing resistance to displacement — a stability measurement, not a measurement of cutting mechanics, knee load or injury risk. Springsoles have not been shown to reduce knee load during cutting. For training aimed specifically at cutting and knee durability, see /train/soccer-cutting-and-knee-durability.

    Springbak® Springsoles

    Checking price…
    View current price on springbak.net

    Ships from the USA · 30-day no-questions-asked returns

    Train for soccer

    Read more on The Edge

    All Edge articles

    Springbak® — MADE IN THE USA. Individual results vary.

    Last updated 2026-08-26.

    Four U.S. patents. Force-plate tested. → /patents · /proof